Effect of Sintering Temperature on Mechanical Properties and Microstructure of Powder Metallurgy Al-Niti-Sic Smart Composites
Journal: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) (Vol.10, No. 3)Publication Date: 2020-06-30
Authors : Purusothaman M Rajesh S Mayandi K; Rajini N;
Page : 9975-9984
Keywords : NiTi; SiC; Aluminum; Density; Porosity; Compression Strength;
Abstract
Smart materials are its composites are new kind of materials and mostly used in biomedical applications. The aim of present work is to study the effect of sintering temperature on mechanical properties and its microstructures. In this work, aluminium &NiTi,SiC is used as matrix and reinforcement materials. The fabricated composites are subjected to sintering process, the sintering temperature are maintained as 500oC, 550oC and 600oC for 60 minutes of time. The mechanical properties of the sintered smart composites are measured and reported. The density, porosity and Compression strength of the smart composites is measured as per the ASTM standard and it is found that addition of reinforcements increases the compression strength and same trend is observed while increasing the sintering temperature
Other Latest Articles
- An Improved Method on Electronic Eye for Weaving Loom
- A Review on Dbd Plasma Actuator for Utilization in Various Application
- Tool Offset Influence on Mechanical and Microstructure Properties of Dissimilar AL6082 and Copper Friction Stir Welded Joints
- Numerical Solution of Free Convective Stratified Fluid Flow over an Infinite Vertical Porous Plate with Hall Effect
- Experimental Investigation of Friction Welding on Similar Al Plate and Tube
Last modified: 2020-10-10 15:52:20