EXPERIMENTAL AND THEORTICAL STUDY OF THE THERMAL PERFORMANCE OF HEAT PIPE HEAT EXCHANGER
Journal: International Journal of Mechanical Engineering and Technology(IJMET) (Vol.7, No. 3)Publication Date: 2016-05-23
Authors : ABDULSALAM D.MOHAMED; AAMER M.AL-DABAGH; DUAA A.DIAB;
Page : 102-111
Keywords : mechanical engineering; iaeme; research; IJMET; journal article; research paper; open access journals; international journals; Heat Pipe Heat Exchanger; Effectiveness; Mass Flow Rate Ratio; Temperature Distribution.;
Abstract
Heat pipe heat exchanger (HPHE) considers one of the most useful devices for the recovery of waste heat energy. An Experimental study has been carried out on air to ?air HPHE constructed of thermosyphon heat pipes with distilled water as the working fluid and a fill ratio of 75% from the evaporator length. Its model was composed of 4 rows, each row contains 12 copper tubes, each tube have ID= 9.5 mm, OD=10mm and length =950 mm and the rows of tubes were arranged in a staggered manner. Aluminum wavy plate fins of 0.1mm thickness were fixed among the tubes to increase the heat transfer area. Tests were conducted at various flow rates (air flow rate through evaporator and condenser sections) ranged between 0.12 and 0.37 kg/s and at different temperatures of air entering evaporator section (90, 100,110) ℃ to indicate discontinuity in the effectiveness when the flow rate ratio equal to one .
Other Latest Articles
- STEP-AEROBICS AT PHYSICAL TRAINING LESSONS
- EFFECT OF (AL2 O3) NANOFLUID ON HEAT TRANSFER CHARACTERISTICS FOR CIRCULAR FINNED TUBE HEAT EXCHANGER
- POTENTIAL ANALYSIS OF POWER GENERATION BY NON WOODY BIOMASS AND COAL BIOMASS MIXED BRIQUETTES
- MULTI RESPONSE OPTIMISATION OF DIE SINKER EDM FOR ALSIC COMPOSITE
- MICROSTRUCTURAL CHARACTERIZATION AND HOT EROSION BEHAVIOR OF CRC-NICR COATED STEEL USING HVOF TECHNIQUE
Last modified: 2016-07-26 22:00:06