ResearchBib Share Your Research, Maximize Your Social Impacts
Sign for Notice Everyday Sign up >> Login

Main Menu

Searching By

PARTNERS

Contact us

Archived Papers for Journal

International Journal of Mechanical Engineering and Technology(IJMET) >>

Vol.7, No.3

Publisher: IAEME Publication

Publishing Date: 2016-05-23

  1. SAVING ENERGY BY USING INSULATION

    Authors: HASSAN K. ABDULLAH; SAJAD M. ABOUD

  2. UNMANNED SURFACE VEHICLE (USV) FOR COASTAL SURVEILLANCE

    Authors: PRABHU T.

  3. MODERN RAPID 3D PRINTER - A DESIGN REVIEW

    Authors: PRABHU T.

  4. CONCEPT OF FINITE ELEMENT MODELLING FOR TRUSSES AND BEAMS USING ABAQUS

    Authors: PRAVEEN PADAGANNAVAR

  5. MICROSTRUCTURAL CHARACTERIZATION AND HOT EROSION BEHAVIOR OF CRC-NICR COATED STEEL USING HVOF TECHNIQUE

    Authors: MRUTHUNJAYA M; PARASHIVAMURTHY K.I.; DEVAPPA

  6. MULTI RESPONSE OPTIMISATION OF DIE SINKER EDM FOR ALSIC COMPOSITE

    Authors: MUKESH REGMI; ANIL POL; SACHIN KULKARNI

  7. POTENTIAL ANALYSIS OF POWER GENERATION BY NON WOODY BIOMASS AND COAL BIOMASS MIXED BRIQUETTES

    Authors: NISHANT KUMAR SRIVASTAVA; MOHAMMAD TARIQ; PRAVESH KUMAR SRIVASTAVA

  8. EFFECT OF (AL2 O3) NANOFLUID ON HEAT TRANSFER CHARACTERISTICS FOR CIRCULAR FINNED TUBE HEAT EXCHANGER

    Authors: QASIM S. MAHDI; KAMIL ABDUL HUSSEIN; AGHAREED MOHAMMED ISFAYH

  9. EXPERIMENTAL AND THEORTICAL STUDY OF THE THERMAL PERFORMANCE OF HEAT PIPE HEAT EXCHANGER

    Authors: ABDULSALAM D.MOHAMED; AAMER M.AL-DABAGH; DUAA A.DIAB

  10. EFFECT OF HAND ARM VIBRATION EXPOSURE IN MANUFACTURING INDUSTRY

    Authors: PANKAJ SHARMA; SINGH M.P.

  11. STUDIES ON FINNED BASIN SOLAR STILL

    Authors: VIVEK SACHAN; AJEET KUMAR RAI

  12. ENHANCEMENT OF HEAT TRANSFER IN SHELL AND TUBE HEAT EXCHANGER WITH TABULATOR AND NANOFLUID

    Authors: QASIM S. MAHDI; ALI ABDULRIDHA HUSSEIN

  13. FACTORS AFFECTING BEST MAINTENANCE PRACTICE IN TANZANIA PUBLIC SECTOR

    Authors: JOSEPH N. MKILANIA

  14. FACTORS RELATED TO HUMAN RESOURCES AFFECTING THE MAINTENANCE EFFECTIVENESS IN TANZANIAN INDUSTRIES

    Authors: JOSEPH N. MKILANIA

  15. STUDY OF PERFORMANCE EVALUATION OF DOMESTIC REFRIGERATOR WORKING WITH MIXTURE OF PROPANE, BUTANE AND ISOBUTENE REFRIGERANT (LPG)

    Authors: AJEET KUMAR RAI; SALEM ALABD MOHAMED

  16. NUMERICAL INVESTIGATION OF AN UNSTEADY MIXED CONVECTIVE MASS AND HEAT TRANSFER MHD FLOW WITH SORET EFFECT AND VISCOUS DISSIPATION IN THE PRESENCE OF THERMAL RADIATION AND HEAT SOURCE/SINK

    Authors: SURESH; VEENA P.H.; PRAVIN V. K.

  17. INVESTIGATION ON MECHANICAL PROPERTIES OF HEMP-E GLASS FIBER REINFORCED POLYMER COMPOSITES

    Authors: SOMASHEKAR S. M; MANJUNATH V.; GOWTHAM M. J.; BALASUBRAMANIAM N. S

  18. SIX DEGREES OF FREEDOM INTEGRATION DEVICE

    Authors: PRANAV SURYAWANSHI; SOHAM WADNAP; RUCHITA PEDRAM; NIKHIL WAKODE; AJAJ ATTAR

  19. PERFORMANCE AND EMISSION ANALYSIS OF POROUS MEDIA COMBUSTION CHAMBER IN DIESEL ENGINES FOR DIFFERENT FUEL BLENDS

    Authors: KRISHNAIAH B. V.; BALU NAIK B.

  20. EXPERIMENTAL AND NUMERICAL INVESTIGATION OF TEMPERATURE DISTRIBUTION FOR MEAT DURING FREEZING PROCESS

    Authors: HUSAM MAHDI HADI; QASIM S. MAHDI; NESSRIAN ALI HUSSIEN

  21. HEAT TRANSFER AUGMENTATION OF LAMINAR NANOFLUID FLOW IN HORIZONTAL TUBE INSERTED WITH TWISTED TAPES

    Authors: QASIM S. MAHDI; NOOR AM. MOHAMMED

  22. OPTIMIZATION OF PROCESS PARAMETERS IN DIRECT METAL DEPOSITION TECHNIQUE USING TAGUCHI METHOD

    Authors: SUBODH KUMAR; AJIT KUMAR SINGH; CHOUDHARY JAMSHED ANWAR; VINAY SHARMA

  23. COMPARATIVE STUDY OF THE EFFECT OF DWELLING THE PUNCH AT THE BDC VS WITHOUT DWELLING AT THE BDC ON THE DEEP DRAWING PROCESS BY FE SIMULATION

    Authors: PRIYA B. VHANGADE; SUDHAKAR RAJEEV D.S.S.; SOLANKI A.; BASAPPA U. VHANGADE

  24. THE VARIATION IN PHYSICAL PROPERTIES AFFECTS THE VERTICAL COMPRESSIVE STRENGTH OF THE RUDRAKSHA-BEAD (ELAEOCARPUS GANITRUS ROXB)

    Authors: ABHISHEK KR. SINGH; DURG VIJAY RAI

  25. DETERMINATION OF HEAT TRANSFER COEFFICIENT OF BRAKE ROTOR DISC USING CFD SIMULATION

    Authors: SANKET KOTHAWADE; ADITYA PATANKAR; ROHIT KULKARNI; SAMEER INGALE

  26. ANALYSIS OF FRICTION INDUCED VIBRATION DURING ENGAGEMENT OF CLUTCHES

    Authors: AMEYA R. SALUNKE; NISHANT S. KULKARNI

  27. FAILURE ANALYSIS OF GAS TURBINE BLADE USING FINITE ELEMENT ANALYSIS

    Authors: BARHM ABDULLAH MOHAMAD; ABDELSALAM ABDELHUSSIEN

  28. STRUCTURAL AND VIBRATIONAL RESPONSE ANALYSIS OF H.P. BLADED DISC ASSEMBLY

    Authors: BHARATH BHASKAR; ANAND. S. N.; KRISHNA RAO T.

  29. MODELING AND OPTIMIZATION OF A MOBILE CROP RESIDUE DISINTEGRATOR

    Authors: Nilesh Awate; D.J.Tidke

  30. PERFORMANCE EVALUATION OF TWO STAGE AIR COOLER IN DIFFERENT SPEED

    Authors: MOHAMMAD UL HASSAN

  31. THERMAL CONDUCTIVITY ANALYSIS IN VARIOUS MATERIALS USING COMPOSITE WALL APPARATUS

    Authors: VIKAS MUKHRAIYA; RAJ KUMAR YADAV; SACHENDRA KORI

  32. DESIGN AND DEVELOPMENT OF A TRANSMISSION SYSTEM FOR AN ALL TERRAIN VEHICLE

    Authors: ADITYA PATANKAR; ROHIT KULKARNI; SANKET KOTHAWADE; SAMEER INGALE

  33. MECHANICAL BEHAVIOUR OF DAMAGED CENTRAL CORE STRAND CONSTITUTING A STEEL WIRE ROPE HOIST UNDER THE EFFECT OF A STATIC LOAD

    Authors: BOUDLAL E.; BARAKAT M.; MOUHIB; LAHLOU M.; EL GHORBA M.; OUAOMAR H.

  34. FORMULATION OF A FIELD DATA BASED MODEL TO ESTIMATE THE NOISE LEVEL IN A DIESEL GENERATOR SET WITH ACOUSTIC ENCLOSURE

    Authors: ASKHEDKAR R. R.; MODAK J. P.; VANALKAR A. V.

  35. PROCESS FLOW AND ANALYSIS OF CCS PLANT INSTALLED AT RGPV BHOPAL RUN BY BIOMASS GASIFIER

    Authors: SAVITA VYAS; SETHI V.K.; CHOUHAN J.S.

  36. 3D PRINTING TECHNOLOGIES IN VARIOUS APPLICATIONS

    Authors: RAMYA A.; SAI LEELA VANAPALLI

  37. PNEUMATICALLY DRIVEN VEHICLE WITH RECHARGEABLE BATTERY DURING DRIVE- AN EXPLORATORY STEP IN ADDRESSING ENVIRONMENTAL POLLUTION

    Authors: GURU SRI CHARAN U.; PHANINDRA P.D.; MURTY A.S.R

  38. IMPROVEMENT IN PROCESS INDUSTRIES BY USING WORK STUDY METHODS: A CASE STUDY

    Authors: SINGH M. P.; HEMANT YADAV