A NOVEL DESIGN AND EVALUATION OF RECTANGULAR MICROSTRIP ANTENNA FOR MICROWAVE APPLICATION
Journal: International Journal of Electronics and Communication Engineering and Technology (IJECET) (Vol.6, No. 7)Publication Date: 2015-07-30
Authors : P. NAVEEN KUMAR; RAVI.H.R; S.CHANDRAMMA; KISHAN SINGH; NAGARAJ KULKARNI; S.N.MULGI; P.V.HUNGUND;
Page : 1-7
Keywords : Iaeme Publication; IAEME; Communication; Engineering; IJECET; Penta; T-Shape; Impedance Bandwidth; Microwave Communication.;
Abstract
A novel design of rectangular microstrip antenna is realized for penta band operation from conventional rectangular microstrip antenna (CRMA) by loading slots on the conducting patch. The penta bands are achieved by incorporating four T- s haped slots along the length and width of CRMA. The magnitude of each operating bands spread over c to ku band of frequency spectrum are found to be 1.14%, 7.29%, 1.6%, 3.71% and 3.33% respectively. Further these penta bands can be converted to hexa bands by removing two T-shaped sl ots along the length of CRMA without changing the nature of radiation characteristics. T he magnitude of each operating band is found to be 2.70 %, 5.82 %, 12.15 %, 3.45 %, 7.30 % and 7.13 % respectively. The proposed antennas may find application in microwave communication systems operating at c to ku bands.
Other Latest Articles
- BAND PASS DESIGN WITH FLOATING RESISTOR SIMULATION APPLICATION AS FEEDBACK USING OPERATIONAL TRANSCONDUCTANCE AMPLIFIER
- CONGESTION CONTROL FOR SCALABILITY IN BUFFERLESS ON-CHIP NETWORKS WITH FPGA IMPLEMENTATION
- MINIMALLY BUFFERED DEFLECTION ROUTER INTERCONNECT WITH PREDICTION, IN NETWORK-ON-CHIP WITH FPGA IMPLEMENTATION
- ESP 8266: A BREAKTHROUGH IN WIRELESS SENSOR NETWORKS AND INTERNET OF THINGS
- PROPOSING A MECHANISM AND INTERNAL DESIGN OF SYNCHRONOUS COUNTERS FOR DISPLAYING DECIMAL VALUES ON SEVEN SEGMENT DISPLAYS
Last modified: 2016-05-30 22:06:22