Estimation of Life Time of Fuel Droplet Evaporation with Various in Cylinder Pressures, Compression Ratios and Exhaust Gas Recirculation
Journal: International Journal of Engineering Research (IJER) (Vol.5, No. 8)Publication Date: 2016-08-01
Authors : Jyotirmoy Mukherjee; M. Velliangiri;
Page : 676-679
Keywords : simulation; analytical; lifetime; in cylinder pressure; compression ratio; exhaust gas recirculation.;
Abstract
The current research proposes a novel technique using simulation-analytical method to determine the lifetime of droplet evaporation in compression ignition (CI) engine. Using this technique, investigation was carried out to determine the optimum conditions for minimum droplet lifetime. The variation of droplet lifetime was studied for three parameters namely in cylinder pressure, compression ratio and exhaust gas recirculation (EGR) percentage. The best conditions for low droplet lifetime were obtained.
Other Latest Articles
- Comparative Analysis of MIVAN Formwork Building and Conventional Formwork Building Based on Cost and Duration
- Short Term Trend of Streamflow in West Coast of India
- Need and Usage of Traceability Matrix for Managing Requirements
- Numerical Analysis of Premixed Combustion in Heating Plate by T-type Ejector
- CFD Analysis and Comparision of Spiroid and Dual Feather Winglets
Last modified: 2016-08-08 16:07:39