Understanding Die Attach Epoxy Open Time
Journal: International Research Journal of Advanced Engineering and Science (Vol.4, No. 4)Publication Date: 2020-08-15
Authors : Michael D. Capili;
Page : 11-14
Keywords : Die Attach; Open Time; Epoxy Coverage;
Abstract
An epoxy bond is formed by attaching the die to the leadframe with the use of epoxy glue. A drop of epoxy is dispensed on the package and the die placed on top of it. The package needs to be heated at an elevated temperature to cure the epoxy properly. This process uses adhesives such as polyimide, epoxy and silver-filled glass as die attach material to mount the die on the die pad. The mass of epoxy on the die peripheral of the die is known as the Epoxy Coverage area after die bonded, this provide mechanical strength along die edge as shown in Figure 1. Common criteria or requirement for epoxy coverage is 100%. The problems in achieving and controlling the Epoxy Coverage and Inadequate corner coverage can lead to delamination at the corners. This paper aims to share and discuss the study of actual experimental for Die Attach Epoxy Open time as part of control to achieve good epoxy coverag
Other Latest Articles
- Mechanical Interlocking Integration for Lead to Mold Interfacial Strength Improvement
- Reducing the See-saw Effect of Un-balanced Die-Pad Architecture for COSL Device
- Modeling Study on Die Attach Glue Voids in Very Thin Smart Card Module
- Using Predictive Modeling Approach in Eliminating Die Crack Induced by Ejector Pin
- QFN Strip Warpage Reduction through Modeling of the Impact of Package and Leadframe Thickness
Last modified: 2020-06-14 20:30:27